@min and @max, or the proportion of observed values that fall within that range.
<handNote> element describing the hand considered responsible for the content of the element concerned.
<damage> element with the @degree attribute should only be used where the text may be read with some confidence; text supplied from other sources should be tagged as <supplied>.
high
medium
low
unknown
assigns an arbitrary number to each stretch of damage regarded as forming part of the same physical phenomenon.
<refsDecl> element in the TEI header
contains a PID (persistent identifier) that aligns the content of the given element or the value of the given attribute with the appropriate simple Data Category (or categories) in ISOcat.
internal
there is internal evidence to support the intervention.
external
there is external evidence to support the intervention.
conjecture
the intervention or interpretation has been made by the editor, cataloguer, or scholar on the basis of their expertise.
[^\p{C}\p{Z}]+
indicates whether this is an instant revision or not.
unknown
inapplicable
[^\p{C}\p{Z}]+
contains an expression in some formal style definition language which defines the rendering or presentation used for this element in the source text
points to a description of the rendering or presentation used for this element in the source text.
<person> element elsewhere in the description.
characterizes the particular script or writing style used by this hand, for example secretary, copperplate, Chancery, Italian, etc.
points to a full description of the script or writing style used by this hand, typically supplied by a <scriptNote> element elsewhere in the description.
describes the tint or type of ink, e.g. brown, or other writing medium, e.g. pencil
[^\p{C}\p{Z}]+
specifies how widely this hand is used in the manuscript.
sole
only this hand is used throughout the manuscript
major
this hand is used through most of the manuscript
minor
this hand is used occasionally in the manuscript
[^\p{C}\p{Z}]+
@xml:id of a <unitDef> element that defines a unit of measure.
specifies the number of the specified units that comprise the measurement
(\-?[\d]+/\-?[\d]+)
indicates the substance that is being measured
[^\p{C}\p{Z}]+
The @unit attribute may be unnecessary when @unitRef is present.
[^\p{C}\p{Z}]+
(reference to the canonical name) provides a means of locating the canonical form (nym) of the names associated with the object named by the element bearing it.
below
below the line
bottom
at the foot of the page
margin
in the margin (left, right, or both)
top
at the top of the page
opposite
on the opposite, i.e. facing, page
overleaf
on the other side of the leaf
above
above the line
end
at the end of e.g. chapter or volume.
inline
within the body of the text.
inspace
in a predefined space, for example left by an earlier scribe.
[^\p{C}\p{Z}]+
@target, using a language tag generated according to BCP 47.
@targetLang should only be used on if @target is specified.
specifies the destination of the reference by supplying one or more URI References
specifies the intended meaning when the target of a pointer is itself a pointer.
all
if the element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.
one
if the element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.
none
no further evaluation of targets is carried out beyond that needed to find the element specified in the pointer's target.
(target function) describes the function of each of the values of the @target attribute of the enclosed <link>, <join>, or <alt> tags.
[^\p{C}\p{Z}]+
[^\p{C}\p{Z}]+
[^\p{C}\p{Z}]+
[^\p{C}\p{Z}]+
(edition reference) provides a pointer to the source edition in which the associated feature (for example, a page, column, or line break) occurs at this point in the text.
@scheme.
[\d]+[a-z]*[\d]*(\.[\d]+[a-z]*[\d]*){0,3}
@schemeVersion can only be used if @scheme is specified.
@unit attribute.
[^\p{C}\p{Z}]+
specifies the end-point of the range of units indicated by the @unit attribute.
[^\p{C}\p{Z}]+
@formula is provided to describe a mathematical calculation such as a conversion between measurement systems.
<pb> element).
column
column breaks.
line
line breaks (synonymous with the <lb> element).
book
any units termed book, liber, etc.
poem
individual poems in a collection.
canto
cantos or other major sections of a poem.
speaker
changes of speaker or narrator.
stanza
stanzas within a poem, book, or canto.
act
acts within a play.
scene
scenes within a play or act.
section
sections of any kind.
absent
passages not present in the reference edition.
unnumbered
passages present in the text, but not to be included as part of the reference.
[^\p{C}\p{Z}]+
(paragraph) marks paragraphs in prose. [3.1. Paragraphs 7.2.5. Speech Contents]
cancelled
deleted
editorial
for features omitted from transcription due to editorial policy
illegible
inaudible
irrelevant
sampling
[^\p{C}\p{Z}]+
in the case of text omitted because of damage, categorizes the cause of the damage, if it can be identified.
Sample values include: 1] rubbing; 2] mildew; 3] smoke
[^\p{C}\p{Z}]+
(addition) contains letters, words, or phrases inserted in the source text by an author, scribe, or a previous annotator or corrector. [3.4.3. Additions, Deletions, and Omissions]
illegible
inaudible
faded
background_noise
eccentric_ductus
[^\p{C}\p{Z}]+
Where the difficulty in transcription arises from damage, categorizes the cause of the damage, if it can be identified.
Sample values include: 1] rubbing; 2] mildew; 3] smoke
[^\p{C}\p{Z}]+
(name, proper noun) contains a proper noun or noun phrase. [3.5.1. Referring Strings]
<label> element preceding the list item.
index
each list item is an entry in an index such as the alphabetical topical index at the back of a print volume.
instructions
each list item is a step in a sequence of instructions, as in a recipe.
litany
each list item is one of a sequence of petitions, supplications or invocations, typically in a religious ritual.
syllogism
each list item is part of an argument consisting of two or more propositions and a final conclusion derived from them.
[^\p{C}\p{Z}]+
contains one component of a list. [3.7. Lists 2.6. The Revision Description]
(index entry) marks a location to be indexed for whatever purpose. [3.8.2. Index Entries]
[^\p{C}\p{Z}]+
indicates the location of a graphic or illustration, either forming part of a text, or providing an image of it. [3.9. Graphics and Other Non-textual Components 11.1. Digital Facsimiles]
setting
describes a setting.
entrance
describes an entrance.
exit
describes an exit.
business
describes stage business.
novelistic
is a narrative, motivating stage direction.
delivery
describes how a character speaks.
modifier
gives some detail about a character.
location
describes a location.
mixed
more than one of the above
[^\p{C}\p{Z}]+
contains the whole of a TEI encoded corpus, comprising a single corpus header and one or more <TEI> elements, each containing a single text header and a text. [4. Default Text Structure 15.1. Varieties of Composite Text]
@matchPattern which, once subpattern substitution has been performed, complete the URI.
(TEI header) supplies descriptive and declarative metadata associated with a digital resource or set of resources. [2.1.1. The TEI Header and Its Components 15.1. Varieties of Composite Text]
<text>, or represent only a subset.
documents the usage of a specific element within a specified document. [2.3.4. The Tagging Declaration]
<namespace> element.
specifies the number of occurrences of this element within the text.
(with unique identifier) specifies the number of occurrences of this element within the text which bear a distinct value for the global @xml:id attribute.
supplies the formal name of the namespace to which the elements documented by its children belong. [2.3.4. The Tagging Declaration]
@scheme attribute.
(style definition language declaration) specifies the name of the formal language in which style or renditional information is supplied elsewhere in the document. The specific version of the scheme may also be supplied. [2.3.5. The Default Style Definition Language Declaration]
<textDesc>. [2.3.7. The Classification Declaration]
<geo> element elsewhere within the document. [2.3.8. The Geographic Coordinates Declaration]
@toUnit.
the target unit of measurement for a conversion from a source unit referenced in @fromUnit.
(application information) records information about an application which has edited the TEI file. [2.3.11. The Application Information Element]
@xml:lang attribute.
specifies the approximate percentage (by volume) of the text which uses this language.
(text classification) groups information which describes the nature or topic of a text in terms of a standard classification scheme, thesaurus, etc. [2.4.3. The Text Classification]
<taxonomy> element, or by some other resource.
(classification code) contains the classification code used for this text in some standard classification system. [2.4.3. The Text Classification]
<taxonomy> element, or some other resource.
(category reference) specifies one or more defined categories within some taxonomy or text typology. [2.4.3. The Text Classification]
<taxonomy> element, or by some other resource.
(calendar description) contains a description of the calendar system used in any dating expression found in the text. [2.4. The Profile Description 2.4.5. Calendar Description]
groups a number of change descriptions associated with either the creation of a source text or the revision of an encoded text. [2.6. The Revision Description 11.6. Identifying Changes and Revisions]
<change> elements is to be considered significant or not
(TEI document) contains a single TEI-conformant document, combining a single TEI header with one or more members of the model.resource class. Multiple <TEI> elements may be combined within a <TEI> (or <teiCorpus>) element. [4. Default Text Structure 15.1. Varieties of Composite Text]
<change> elements documenting a state or revision campaign to which the element bearing this attribute and its children have been assigned by the encoder.
(-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?)
(-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?)
(-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?)
(-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?)
contains a representation of some written source in the form of a set of images rather than as transcribed or encoded text. [11.1. Digital Facsimiles]
<surface> element. [11.1. Digital Facsimiles 11.2.2. Embedded Transcription]
<surface> element as implied by the dimensions given in the <msDesc> element or by the coordinates of the <surface> itself. The orientation is expressed in arc degrees.
defines any line passing through two or more points within a <surface> element. [11.1. Digital Facsimiles 11.2.2. Embedded Transcription]
The first and
last elements of this path are the same. To specify a closed polygon, use
the zone element rather than the path element.
(-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?)
(-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?)
(-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?)
(added span of text) marks the beginning of a longer sequence of text added by an author, scribe, annotator or corrector (see also <add>). [11.3.1.4. Additions and Deletions]
The @spanTo attribute of is required.
L'attribut spanTo est requis.
<handNote> elements documenting the different hands identified within the source texts. [11.3.2.1. Document Hands]
<handNote> element describing the hand concerned.
indicates restoration of text to an earlier state by cancellation of an editorial or authorial marking or instruction. [11.3.1.6. Cancellation of Deletions and Other Markings]
(dimension) indicates whether the space is horizontal or vertical.
horizontal
the space is horizontal.
vertical
the space is vertical.
(substitution) groups one or more deletions (or surplus text) with one or more additions when the combination is to be regarded as a single intervention in the text. [11.3.1.5. Substitutions]
[^\p{C}\p{Z}]+
marks text present in the source which the editor believes to be superfluous or redundant. [11.3.3.1. Damage, Illegibility, and Supplied Text]
[^\p{C}\p{Z}]+
(secluded text) Secluded. Marks text present in the source which the editor believes to be genuine but out of its original place (which is unknown). [11.3.1.7. Text Omitted from or Supplied in the Transcription]
[^\p{C}\p{Z}]+
contains the transcription of a topographic line in the source document [11.2.2. Embedded Transcription]
represents any kind of modification identified within a single document. [11.3.4.1. Generic Modification]
contains a sequence of writing which has been retraced, for example by over-inking, to clarify or fix it. [11.3.4.3. Fixation and Clarification]
<anchor> element typically elsewhere in the document, but possibly in another document, which is the original location of this component.
gives a reference to another element, where the original appears as a merged form.
(optional) indicates whether the element is optional or not
<pos>, <gen>, <number>, <case>, or <iType> (inflectional class). [9.3.2. Grammatical Information]
[^\p{C}\p{Z}]+
specifies the earliest possible date for the event in some custom standard form.
[^\p{C}\p{Z}]+
specifies the latest possible date for the event in some custom standard form.
[^\p{C}\p{Z}]+
indicates the starting point of the period in some custom standard form.
[^\p{C}\p{Z}]+
indicates the ending point of the period in some custom standard form.
[^\p{C}\p{Z}]+
supplies a pointer to some location defining a named point in time with reference to which the datable item is understood to have occurred
supplies a pointer to a <calendar> element or other means of interpreting the values of the custom dating attributes.
<place> element
specifies the faith, religion, or belief set of a person. [13.3.2.1. Personal Characteristics]
<langKnown> elements. [13.3.2.1. Personal Characteristics]
(language known) summarizes the state of a person's linguistic competence, i.e., knowledge of a single language. [15.2.2. The Participant Description]
<taxonomy> element, or pointing to some other resource.
identifies an occupation code defined within the classification system or taxonomy defined by the @scheme attribute.
(organization) provides information about an identifiable organization such as a business, a tribe, or any other grouping of people. [13.3.3. Organizational Data]
[^\p{C}\p{Z}]+
provides information about relationships identified amongst people, places, and organizations, either informally as prose or as formally expressed relation links. [13.3.2.3. Personal Relationships]
[^\p{C}\p{Z}]+
specifies the sex of the person.
[^\p{C}\p{Z}]+
specifies an age group for the person.
[^\p{C}\p{Z}]+
provides information about one of the personalities identified for a given individual, where an individual has multiple personalities. [13.3.2. The Person Element]
[^\p{C}\p{Z}]+
specifies the sex of the persona.
[^\p{C}\p{Z}]+
specifies an age group for the persona.
[^\p{C}\p{Z}]+
(personal group) describes a group of individuals treated as a single person for analytic purposes. [15.2.2. The Participant Description]
[^\p{C}\p{Z}]+
specifies the age group of the participants.
[^\p{C}\p{Z}]+
describes informally the size or approximate size of the group for example by means of a number and an indication of accuracy e.g. approx 200.
[^\p{C}\p{Z}]+
contains data about a geographic location [13.3.4. Places]
supplies a list of participants amongst all of whom the relationship holds equally.
identifies the passive participants in a non-mutual relationship.
describes a person's present or past places of residence. [15.2.2. The Participant Description]
[^\p{C}\p{Z}]+
(socio-economic status) contains an informal description of a person's perceived social or economic status. [15.2.2. The Participant Description]
<taxonomy> element or by supplying a URI for an externally-defined system.
identifies a status code defined within the classification system or taxonomy defined by the @scheme attribute.
contains a description of some status or quality attributed to a person, place, or organization often at some specific time or for a specific date range. [13.3.1. Basic Principles 13.3.2.1. Personal Characteristics]
(list of canonical names) contains a list of nyms, that is, standardized names for any thing. [13.3.6. Names and Nyms]
(synchronous) points to elements that are synchronous with the current element.
points to an element that is the same as the current element.
points to an element of which the current element is a copy.
points to the next element of a virtual aggregate of which the current element is part.
(previous) points to the previous element of a virtual aggregate of which the current element is part.
points to elements that are in exclusive alternation with the current element.
selects one or more alternants; if one alternant is selected, the ambiguity or uncertainty is marked as resolved. If more than one alternant is selected, the degree of ambiguity or uncertainty is marked as reduced by the number of alternants not selected.
defines an association or hypertextual link among elements or passages, of some type not more precisely specifiable by other elements. [16.1. Links]
You must supply at least two values for @target or on
@interval value is expressed, if this is not inherited from the parent <timeline>.
Suggested values include: 1] d (days); 2] h (hours); 3] min (minutes); 4] s (seconds); 5] ms (milliseconds)
d
(days)
h
(hours)
min
(minutes)
s
(seconds)
ms
(milliseconds)
[^\p{C}\p{Z}]+
specifies a time interval either as a number or as one of the keywords defined by the datatype teidata.interval
regular
irregular
unknown
identifies the reference point for determining the time of the current <when> element, which is obtained by adding the interval to the time of the reference point.
provides a set of ordered points in time which can be linked to elements of a spoken text to create a temporal alignment of that text. [16.4.2. Placing Synchronous Events in Time]
@interval value of the timeline or of its constituent points in time.
Suggested values include: 1] d (days); 2] h (hours); 3] min (minutes); 4] s (seconds); 5] ms (milliseconds)
d
(days)
h
(hours)
min
(minutes)
s
(seconds)
ms
(milliseconds)
[^\p{C}\p{Z}]+
specifies a time interval either as a positive integral value or using one of a set of predefined codes.
regular
irregular
unknown
identifies a possibly fragmented segment of text, by pointing at the possibly discontiguous elements which compose it. [16.7. Aggregation]
@target attribute are joined, each subtree become a child of the virtual element created by the join
branches
the children of the subtrees indicated by the @target attribute become the children of the virtual element (i.e. the roots of the subtrees are discarded)
(join group) groups a collection of <join> elements and possibly pointers. [16.7. Aggregation]
@result on each <join> included within the group.
(alternation) identifies an alternation or a set of choices among elements or passages. [16.8. Alternation]
states whether the alternations gathered in this collection are exclusive or inclusive.
excl
(exclusive) indicates that the alternation is exclusive, i.e. that at most one of the alternatives occurs.
incl
(inclusive) indicates that the alternation is not exclusive, i.e. that one or more of the alternatives occur.
If @mode is excl, each weight states the probability that the corresponding alternative occurs. If @mode is incl each weight states the probability that the corresponding alternative occurs given that at least one of the other alternatives occurs.
(alternation group) groups a collection of <alt> elements and possibly pointers. [16.8. Alternation]
<annotation>, <annotationBlock>, or <note>, possibly organized with nested <listAnnotation> elements. [16.10. The standOff Container]
assessing
intent is to assess the target resource in some way, rather than simply make a comment about it
bookmarking
intent is to create a bookmark to the target or part thereof
classifying
intent is to classify the target in some way
commenting
intent is to comment about the target
describing
intent is to describe the target, rather than (for example) comment on it
editing
intent is to request an edit or a change to the target resource
highlighting
intent is to highlight the target resource or a segment thereof
identifying
intent is to assign an identity to the target
linking
intent is to link to a resource related to the target
moderating
intent is to assign some value or quality to the target
questioning
intent is to ask a question about the target
replying
intent is to reply to a previous statement, either an annotation or another resource
tagging
intent is to associate a tag with the target
@ana attribute appears.
(s-unit) contains a sentence-like division of a text. [17.1. Linguistic Segment Categories 8.4.1. Segmentation]
@to attribute, gives the identifier of the node of the entire span of text being annotated.
gives the identifier of the node which is the end-point of the span of text being annotated.
(span group) collects together span tags. [17.3. Spans and Interpretations]
@baseTypes attribute. When no @baseTypes attribute is specified, no feature specification or constraint is inherited.
(feature system description (in FSD)) describes in prose what is represented by the type of feature structure declared in the enclosing fsDecl. [18.11. Feature System Declaration]
@name attribute of <f> elements in the text.
indicates whether or not the value of this feature may be present.
(feature description (in FSD)) describes in prose what is represented by the feature being declared and its values. [18.11. Feature System Declaration]
<fs>, <vAlt>, or primitive value; for the value of an <f> to be valid, it must be subsumed by the specified range; if the <f> contains multiple values (as sanctioned by the @org attribute), then each value must be subsumed by the <vRange>. [18.11. Feature System Declaration]
<f> for this name; if unconditional, it is specified as one (or, depending on the value of the @org attribute of the enclosing <fDecl>) more <fs> elements or primitive values; if conditional, it is specified as one or more <if> elements; if no default is specified, or no condition matches, the value none is assumed. [18.11. Feature System Declaration]
(feature) represents a feature value specification, that is, the association of a name with a value of any of several different types. [18.2. Elementary Feature Structures and the Binary
Feature Value]
@max is not supplied) its upper bound.
(\-?[\d]+/\-?[\d]+)
supplies an upper bound for the numeric value represented.
(\-?[\d]+/\-?[\d]+)
specifies whether the value represented should be truncated to give an integer value.
(string value) represents the value part of a feature-value specification which contains a string. [18.3. Other Atomic Feature Values]
<f> (feature) elements. [18.4. Feature Libraries and Feature-Value Libraries]
@type attribute. [5.2. Markup Constructs for Representation of Characters and Glyphs]